ESP32-C3-DevKit-RUST-1 is a RISC V development board packed with the ESP32-C3-MINI-1, a potent, general Wi-Fi + Bluetooth LE microcontroller unit with a wealth of peripherals. Its small size makes it a perfect selection for multiple Internet of Things (IoT) related functions, including embedded systems, smart homes, and wearables. This version has the ESP32-C3-MINI-1 with 4 MB SPI Flash sans PSRAM.
Please note: The C3 is akin to the ESP32 with RISC V as its core instead of Tensilica and Bluetooth LE (not classic). Nevertheless, this dev board has sparse support; as of now, only Arduino and ESP IDF are available, with no CircuitPython support. Buy if you are developing using the C3 and be aware that its core differs from the ESP32s commonly used.
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKit-RUST-1 on a breadboard. Please note: header is not included.
At the core of the module is ESP32-C3, which has a 32-bit RISC-V single-core processor. The ESP32-C3 integrates a rich set of peripherals, ranging from UART, I2C, I2S, remote control peripheral, LED PWM controller, general DMA controller, TWAI controller, USB Serial/JTAG controller, temperature sensor, and ADC. It also includes SPI, Dual SPI, and Quad SPI interfaces.
This special board, designed for following the Rust Training Program comes with:
- The ESP32-C3-MINI-1 module
- A 6-DoF IMU - ICM-42670-P
- Temperature and humidity sensor - SHTC3
- Li-Ion battery charger
- Type-C USB
The board is designed to be easily used in training sessions, demonstrating Rust capabilities with all the board peripherals.
ESP32-C3 SoC Features
- IEEE 802.11 b/g/n-compliant
- Bluetooth 5, Bluetooth mesh
- 32-bit RISC-V single-core processor, up to 160MHz
- 384 KB ROM
- 400 KB SRAM (16 KB for cache)
- 8 KB SRAM in RTC
- 22 × programmable GPIOs
- 3 × SPI
- 2 × UART
- 1 × I2C
- 1 × I2S
- 2 × 54-bit general-purpose timers
- 3 × watchdog timers
- 1 × 52-bit system timer
- Remote Control Peripheral (RMT)
- LED PWM controller (LEDC)
- Full-speed USB Serial/JTAG controller
- General DMA controller (GDMA)
- 1 × TWAI®
- 2 × 12-bit SAR ADCs, up to 6 channels
- 1 × temperature sensor
Technical Details
Shipping rates Australia wide and New Zealand
FAQ:
- How do I estimate shipping for my order?
- Add products in the shopping cart and head to the checkout page to estimate the shipping.
Dispatch time
Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.
All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.
We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only. All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.
Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.
*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.
We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available.
Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html
Receipt of deliveries
Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:
- leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
- re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee.
Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.